Current input:
Measurement range..................................... 0...20 mA
Programmable measurement ranges..... 0..20 and 4..20 mA
Input resistance.............................. Nom. 20 Ω + PTC 50 Ω
Sensor error detection:
Loop break 4...20 mA.............................. Yes
Voltage input:
Measurement range..................................... 0...10 VDC
Programmable measurement ranges........... 0...1 / 0.2...1 /
0...5 / 1...5 /0...10 and 2...10 VDC
Input resistance............................................ Nom. 10 MΩ
Current output:
Signal range (span).......................................... 0...20 mA
Programmable signal ranges............ 0...20 / 4...20 / 20...0
and 20...4 mA
Load (max.)................................. 20 mA / 800 Ω / 16 VDC
Load stability................................ . 0.01% of span / 100 Ω
Sensor error detection...................... 0 / 3.5 / 21 mA / none
NAMUR NE 43 Upscale / Downscale.......... 21mA / 3.5mA
Voltage output:
Signal range................................................. 0...10 VDC
Programmable signal ranges....................... 0...1 / 0.2...1 / 0...10 / 0...5 /
1...5 / 2...10 / 1...0 / 1...0.2 /
5...0 /5...1 /10...0 /10...2 V
Load (min.).................................................... 500 kΩ
Relay outputs:
Relay functions............................................. Setpoint, Window, Sensor error,
Power and Off
Hysteresis, in % / display counts................... 0.1...25% of span
On and Off delay........................................... 0...3600 s
Sensor error detection................................. Break / Make / Hold
Max. voltage................................................. 250 VRMS
Max. current................................................ 2 A / AC or 1 A / DC
Max. AC power............................................. 500 VA |
