Logo - Madhu Group    
products company profile email contact      
   
 
   
  Products >>> Relays >>>4-20mA Phase Angle (Back to Back SCR )
   
  4-20mA Phase Angle (Back to Back SCR )
 
# 701 Model
weight : @110 gms.
Circuit Diagram


   
 
  • The load Power is Proportional to controller input
  • Output to body 4kV-isolation
  • Input to Output 2500 vrms isolation
  • Heat Sink+Din Rail Mounting (35mm)
  • Used for resistive load only
  • Do not give DC Voltage at 4-20mA input control of
    SSR otherwise input of SSR will fail.
  • Phase Line voltage should be in range of 230 VAC
    +10 % or 440 vac+10 %
  • SSR will not work if heater connnected in star
    without neutral.
  • Heat sink temperatures should not increase700C
  • For dv/dt and transient voltage uses dv/dt
    snubber and metal oxide variastor externally.
   
 
230VAC SSR Perfrmance Graph

   
 
 
SSR
Type No
OUTPUT
Current Amp
with Heat Sink
Voltage
Current amp
at 200C
at 550c
AC-3
(Back to Back SCR) Input : 4mA-20mA or 0 to 10VDC PIV-1200VPK
707 PHT 24 25 420 230 VAC 25 12 Amp 4
707 PHT 24 50 420 10% 50 AC-1 22 Amp 15
707 PHT 24 100 420 Star 100 AC-1 42 Amp 30
707 PHT 24 150 420 with 150 AC-1 85 Amp 60
707 PHT 24 200 420 Neutral 200 AC-1 120 Amp 90
SSR
Type No
Fusing
curren tI2T
Short Circuit
Protection by "B"
type M.C.B. In
AC-3 duty
Type of
Heat Sink
USD/Each
707 PHT 24 25 420 500A2S 6Amp N 41.40
707 PHT 24 50 420 3000A2S 16Amp L 47.75
707 PHT 24 100 420 8000A2S 32Amp X/L 73.20
707 PHT 24 150 420 15000A2S 63Amp W 120.90
707 PHT 24 200 420 25000A2S 100Amp W 127.30
(Back to Back SCR) Input : 4mA-20mA or 0 to 10VDC PIV-1200VPK
SSR
Type No
OUTPUT
Current Amp
with Heat Sink
Voltage Current amp
at 200C
at 550c AC-3
707 PHT 44 25 420 440 VAC 25 12 Amp 4
707 PHT 44 50 420 10% 50 AC-1 22 Amp 15
707 PHT 44 100 420 Delta 100 AC-1 42 Amp 30
707 PHT 44 150 420 Without 150 AC-1 85 Amp 60
707 PHT 44 200 420 Neutral 200 AC-1 120Amp 90
SSR
Type No
Fusing
curren tI2T
Short Circuit
Protection by "B"
type M.C.B. In
AC-3 duty
Type of
Heat Sink
USD/Each
707 PHT 44 25 420 500A2S 6 Amp N 41.40
707 PHT 44 50 420 3000A2S
16 Amp
L 47.75
707 PHT 44 100 420 8000A2S 32 Amp X/L 73.20
707 PHT 44 150 420 1500A2S 63 Amp W 120.90
707 PHT 44 200 420 2500A2S 100 Amp W 127.30
   
 
24 VDC Fan
  • Type"V" 701/707 model
  • current up to 90Amp
    Size : 66mm(W)x210mm(L)
    x 60mm(H) Weight : 1.2kg
    Price US $31.5
  • Optional : 230VAC to 24VDC
    conveter Price will be
    US $6.40 Extra

   
 
#701 Model Diemnsion
   
 
Circuit Diagram For 707 Model Application
  • Glass Industries
  • Furnace Industries
  • Paper Industries
  • Hot runner system of
    plastic Processing Machinery
  • Polyester yarn Processing
    Industries
   
 
Heat sink
  • Weight : 485 gms.
  • Type"C-77" 701/707 model
  • current up to 30Amp.
    Size : 58mm(W)x77mm(L)
    x 67mm(H) + SSR
  • Price US $7.65+ US $0.95
    Din Rail
   
 
Input 4-20mA
Impedance
100 ohms
Currant Min-Max.
4mA-21mA
Input 0-10VDC
Impedance
300 ohms
Currant Min-Max.
0.2VDC/1mA-12VDC/30mA
Output AC :            
RMS on state current
at 20 0 C
IT
AMP
25
40
50
90
On state voltage drop
@rated current
VTM
VRMS
3 to 4
3 to 4
3 to 4
3 to 4
Peak one cycle surge on-50H
zstate current (non-repetitive)
ITSM
A
320
600
800
1200
Fusing current
I2T
A2S
500
1800
3000
7200
Max. forward leakage
current
IDRM
mA
12
12
12
12
Holding current
IHO
mA
175
250
250
250
Critical rate of rise off
state voltage
dv/dt
V/S
350
1500
1500
1500
Thermal resistance Rth
(Junction to case) DC
JC
oC/W
2.3
2.5
2.5
2.7
Operating temperature
oC
-40 to 70
-40 to 70
-40 to 70
-40 to 70
Frequency range
HZ
47 to 63
47 to 63
47 to 63
47 to 63
Repetitive peak off state
voltage(VDRM)
1000 VPK
   
 
Pages : 1 2
 
  Copyright and Privacy Statement Madhu Group